Recent Posts
- Home
- Stop & Go Tire Repair Kit Blog
- HOW TO: Step by Step Instructions for the Stop & Go Tire Plugger
HOW TO: Step by Step Instructions for the Stop & Go Tire Plugger
Posted on
Emergency tubeless tire repair – Don’t have to dismount the tire - Works on punctures from nails, thorns, screws & more! Learn how to use the Stop & Go Tire Plugger with step-by-step instructions and photos.
How To - 9 Easy Steps
STEP 1: Find the puncture, and use the probe & reamer tools to inspect and prepare the hole.
Probe Tool
Reamer Tool
STEP 2: Prepare the Tire Plugger by releasing the push rod. Remove the nozzle, and insert the plug into the tip.
STEP 3: Use the nozzle to push the plug down the barrel.
STEP 4: Insert the nozzle into the puncture by screwing it on the probe. Insert the probe in the tire, and unscrew the probe from the nozzle.
STEP 5: Screw the Tire Plugger on the nozzle. Then, squeeze it until it stops.

STEP 6: Release the push rod and pull the Tire Plugger out of the tire.

STEP 7: Pull the plug with the pliers. This will seat the mushroom head tight against the inner wall.

STEP 8: Fully inflate the tire. The air pressure will hold the plug firmly into place.
STEP 9: Finally, use the razor to trim the plug and you’re all set!
Now that you know how to plug a tire, you can purchase a Stop & Go Tire Plugger kit during our Flash Sale! If you're going to get a flat tire, you might as well be prepared.