Stranded without a spare? Stranded with a spare but no air? Most car manufacturers are cutting corners every way they can. So if you own a late model car with no spare you better be prepared to take control of the situation. This kit enables vehicle owners to perform a safe emergency roadside tire puncture repair and re-inflation. All the other tire mobility kits on the market today come with a cheap imported air compressor and a can of sealant. Sure, you might be able to use the compressor more than once, but the sealant is a one shot deal that comes with an expiration date if it goes unused.

And more importantly, the gooey stuff will render your tire pressure monitoring sensor useless in that tire. You will have to suffer the high cost of replacing the sensor in the damaged tire which also must be replaced!

Tire Mobility kits can cost up to $ 170.00 Don't believe us?? Click here

They all have one thing in common. The spray-in tire sealant provides inconsistent results, is used only once, and requires replacement of the tire and sensor.

The new Stop & Go – Tire Mobility Kit combines an American made air compressor with the award winning Pocket Tire Plugger. This tubeless tire repair system gives you all the necessary hand tools and (15) mushroom shaped rubber plugs to make an effective repair on your car, truck, trailer, SUV, or RV. It’s an ‘on the wheel’ repair.
No dismount is necessary. And no rubber cement is needed!



Why struggle along at 40 mph. on a space saver spare when you can resume normal highway speeds. It’s a simple procedure to install these plugs in your damaged tire.

The mushroom head seals the puncture completely on the inner wall of the tire. The 12 volt air compressor is manufactured from the highest quality components right here in the USA. Also included is the highly respected Accu-gage known as the industry leader in accurate tire pressure readings. It only takes 5-6 minutes to fully inflate your tire.

Multiple repairs and quality reliable inflation. Don’t be stranded! Order Now.

Weighs 4 lbs. – Ground and Air shipments OK


Dimensions: 11" x 5.5" x 3"

  
● Nozzle

● Tire Plugging Device

● Probe Tool

● Reamer/Rasp Tool

● Allen Wrench

● (15) Mushroom Plugs (5/16" diameter shaft x 3/4" length stem)

● Retractable Razor Knife

● Extra Zip Lock Bag

● Pliers

● Aluminum 100 psi Air Compressor (Made in USA)

● 12 foot power cord with adapter

● Extension hose with quick release lever

● In-line 100 psi Accu-gage

● Clip on valve adapter

● 2 inch dial with protective gauge guard

● Push button valve bleeds air to desired pressure

● Continuous reading until chuck is released

● Full instructions for repair and inflation

● 11” x 5.5” x 3” Heavy-Duty Canvas Case

● Weighs 4 lbs.

● Ground and Air shipments OK

There are no instructions available online for this product.

There are no additional details for this product.